MOTORIZED VALVE

Description:

This listing includes 1 unit of motorized ball valve

Thread size: DN20, G3/4” (BSP, reduce port)  

flow hole size: 15mm 

Voltage:12VDC

2 way

valve body:Brass

CR05

Application:

1.HVAC
2.Water treatment
3.Chemical process
4.Small equipment for automatic control
5.Replacing solenoid valve, particularly when solenoid valve can not work reliably

Features:

1).Smart shape, Perform reliably, large output torque, as long as 50000-100000 times.

multi-angel assembling, convenience for all kinds of requirements.

2). Float ball design, no leak, most suitable for heavy dirt and long time no action.

3). The conditions that solenoid valve can not be worked.

4). Under the pressure between 1Mpa and 2Mpa, the working current is only 45mA to 100mA (it depend on the different type)

Technical Parameter:

*Wire type: CR05

CR05 Wiring diagram (5 wires)

1.     Connecting SW and OPEN, the valve open, getting the position, LS.1 connection, the controller tested and find the signal of AOLS, the valve remains fully open position,(remark: it doesn’t power off)

2.     Connecting SW and CLOSE, the valve close, getting the position, LS.2 connection, the controller tested and find the signal of ACLS, the valve remains fully close position,(remark: it doesn’t power off)